Metal Self Drilling Tek Screws
Timber Screws
Timber Self Drilling Screws are suitable for fixing into timber and thin steel thicknesses of up to 0.6mm.They are available in a variety of finishes and unique product features to suit a wide range of environmental conditions.
Metal Self Drilling Tek Screws
Metal Self Drilling Tek Screws have a hardened drill point that will drill and thread in structural steel and mild steel. These metal self drilling tek screw points are designed in a manner much the same as a high speed drill bit.Also available is a drill point to drill through 12mm thick metal.Metal Self Drilling Tek Screws are available in a variety of finishes with unique product features to suit a wide range of environmental conditions.
Roof Zips
A revolutionary self-drilling roofing screw for fastening metal roofing profiles to timber battens and steel purlins, and the most used roofing fasteners on Australian steel roofs for both domestic and commercial establishments.
Poly Teks
These are a Self Drilling Tek Screw with a sealing washer designed for fixing polycarbonate, fibreglass, PVC and fibre cement sheeting to both timber and metal.
Chipboard Screws
Chipboard Screws have a coarse thread and fine shank to provide maximum grip and minimum stripout into chipboard, MDF board and soft timbers.The head has ribs moulded around the countersunk head which help remove the chipboard particles when countersinking.
Treated Timber Screws
Treated Timber Screws are specially designed for quick and easy installation with maximum holding power.Available in either a Zinc or special treated pine coating which meets AS3566 Class 3, to resist the corrosive effects of treated timbers.
Needle Point Screws
Needle Point Screws are all-purpose self-drilling screws for general fixing around the home, into timber and thin metal. Available in a zinc-plated finish.
Plasterboard Screws
Self Drilling Plasterboard Screws feature a bugle shaped head which countersinks neatly into plasterboard without crushing the core, or tearing the face paper. Available in a zinc-plated finish.
Cyclonic Assemblies
Cyclonic Plates and Washers
For protection in high wind environments, cyclone plates & washers are assembled onto
Self Drilling Screws
These plates can withstand category 5 cyclones.
The design of the plates is to suit corrugated roofing and square profiles.
The washer and screw can be painted to match roof colour
